48V 100Ah / 100A Continuous Discharge LiFePO4 Battery




Model: AT-LFP-48-100AV01 48V 100Ah / 100A cont discharge LiFePO4 Battery
Chemistry: Lithium Iron Phosphate (LiFePO4)
Battery dimensions: L-520mm x W-268mm x H-228mm
Weight: 40kg
Cell type1: 3.2V 100Ah Prismatic cells
Battery module: 16 pcs 3.2V 100Ah cells, 1 parallel and 16 serial
Casing material for single cell: Nickel plated steel
Standard capacity(0.2C5A): 51.2V 100Ah / 5120Wh
Cycle life: > 2000 cycles at 100% Depth of Discharge (DoD) Under normal usage where the DOD is <80%, cycle life is expected to be up to  5000 cycles
Rated voltage: 51.2V
Working voltage per cell: 3.2V
Charge voltage: 58.4V
Max. charge voltage per cell: 3.65V
Cut-off voltage: Nominal 40V Cut-off is triggered when the first cell reaches 2.50V
Depth of discharge (DoD): 100% Batteries can be discharged to 100% of the rated capacity
Optimum charge current: 20A 0.2C
Charging time: Approximately 5 hours When charging from low voltage cut-off point
Maximum Charge Current: Max. charge current 50A (1C50A) Cell max voltage < 3.9V
Max continuous discharge current: 100A 1C, cell min voltage> 2.0v Peak discharge current 200A 2.6C(5 seconds) Ingress Protection IP65
Operating temperatures: Standard 0℃~45℃ Discharge -20℃~65℃ Storage -20℃~45℃
Impedance (Max, at 1000Hz.): ≤ 45mΩ
Storage performance: Capacity can be kept ≥ 80% in storage for 12months Battery should be kept at -20℃ ~ 45℃ where it’s dry, clean and well-ventilated.
Connecting Terminals  Pos (+)  & Neg (-): M8
IP Rating (Ingress Protection): IP65

Protected from total dust ingress & Protected from low pressure water jets from any direction

Warranty: 4 years


There are no reviews yet.

Be the first to review “48V 100Ah / 100A Continuous Discharge LiFePO4 Battery”

Your email address will not be published. Required fields are marked *